LITETEL Range

LT56NE • 62NE • 63NF • 69NF
Litetel Truck - Max height for less weight

Telescopic boom models

Up to 23m

Up to 8.5m

Up to 360º continuous

GVW vehicles

Specially designed jacks with a narrow spread, offering the advantages of compact width when working in confined locations such as cities or busy roads.

Features & benefits

• Ideal for maximum height applications
• Four stabilisers / Greater payload
• Narrow jacking on 7.5 tonne GVW
• Twin proportional joystick controls
• Full platform function emergency power
• All hoses and cables inside the boom
• Aluminium inner telescopic boom
• Steel outer boom and pedestal
• Full functions at ground
• Canbus control system
• Truck mount

Specifications

Please note that SWL, material handling capabilities, outreach and working height vary according to specification of platform and base vehicle.  Figures are intended as a best guide only.  Versalift is certified to ISO9001:2000 by TUV UK Quality Assurance Ltd; certificate number GB00468.

Why choose Litetel?

• Maximum working heights ranging from 19m to 23m.
Working heights will vary according to chassis and GVW of the vehicle being mounted to.
• Maximum working horizontal outreach up to 8.5m in standard two man 200kg SWL mode.
Optional extended outreach for single man up to 11.5m at 120kg SWL.
• Platform capacity from 200kg for two person models with safety harness anchor points.  Walk in bucket option also available.
• High strength steel, hydraulic levelled 85 x 125 x 110cm end mounted 2 man high strength steel platform, with side opening section and two safety D-ring for safety harness attachment.  Cost option walk in lightweight aluminium frame platform for two-man operation, with integrated finger guard and two harness anchors.
• Three stage telescopic light weight main boom. 1st boom and 2nd mid boom are manufactured of high strength steel. 3rd boom is made of high strength aluminium.
• Articulation from 20º below horizontal to 85º above horizontal.
• On ‘NF’ models only a fly boom (jib) with 180º working vertical arc, reverse articulated.  Allows easy access to the underside of bridges, decks and platforms, offering greater reach envelope characteristics.
• Open centre hydraulic system at 15 litres per minute, operated at - 2,250psi
• Deck mounted electric lower controls, including over ride.  Onboard mechanic system with LED display.
• Engine start / stop at platform and lower controls.
• 360º continuous rotation with shear ball bearing.